Are you wondering what the Clean feature does on your water softener? Read on below to find out!
What is it?
The Clean feature is only available on select models. It adds an additional fast rinse period to your normal recharge cycles. You may want to use this feature if you have a water supply that has high amounts of sediment or iron. This feature helps preserve the resin capacity.
How to Turn the Clean Feature On (click here to expand directions)
1. Hold the Program button down until '000' appears, then let go.
2. Tap the Program button twice to display 'Clean' and 'OFF' on the screen. Use the Up or Down arrow to switch this 'ON'.
3. Tap the Program button again to chose the duration of the clean cycle using the Up/Down arrows. This can be set from 1 to 15 minutes. We recommend starting with lower first to increase efficiency and conserve water. You can increase this later if you feel necessary.
4. Continue tapping the Program button until you return to the home screen with the current time.
Please let us know if this article was helpful by voting below.